manualshive.com logo in svg

Hitachi H8S/2627, Hardware Manual

The Hitachi H8S/2627 Hardware Manual is an essential resource for users seeking a comprehensive guide for this product. Available for free download at manualshive.com, this comprehensive manual provides detailed instructions and insightful information, ensuring users can make the most of their experience with the Hitachi H8S/2627.

Share
Download
background image

Rev. 1.0, 09/02, page xxi of xxxiv 

 

Figures 

Section 1   Overview

 

Figure 1.1   Internal Block Diagram .................................................................................................2 
Figure 1.2   Pin Arrangement............................................................................................................3 
 
Section 2   CPU 
Figure 2.1   Exception Vector Table (Normal Mode) .....................................................................13 
Figure 2.2   Stack Structure in Normal Mode .................................................................................13 
Figure 2.3   Exception Vector Table (Advanced Mode) .................................................................14 
Figure 2.4   Stack Structure in Advanced Mode .............................................................................15 
Figure 2.5   Memory Map ...............................................................................................................16 
Figure 2.6   CPU Registers .............................................................................................................17 
Figure 2.7   Usage of General Registers .........................................................................................18 
Figure 2.8   Stack ............................................................................................................................19 
Figure 2.9   General Register Data Formats (1) ..............................................................................22 
Figure 2.9   General Register Data Formats (2) ..............................................................................23 
Figure 2.10   Memory Data Formats...............................................................................................24 
Figure 2.11   Instruction Formats (Examples) ................................................................................37 
Figure 2.12   Branch Address Specification in Memory Indirect Mode .........................................41 
Figure 2.13   State Transitions ........................................................................................................45 
 
Section 3   MCU Operating Modes 
Figure 3.1   Address Map................................................................................................................51 
 
Section 4   Exception Handling 
Figure 4.1   Reset Sequence (Advanced Mode with On-chip ROM Enabled)................................56 
Figure 4.2   Reset Sequence  

(Advanced Mode with On-chip ROM Disabled: Not Available in this LSI) ..............57 

Figure 4.3   Stack Status after Exception Handling ........................................................................60 
Figure 4.4   Operation when SP Value Is Odd................................................................................61 
 
Section 5   Interrupt Controller 
Figure 5.1   Block Diagram of Interrupt Controller ........................................................................64 
Figure 5.2   Block Diagram of Interrupts IRQ0 to IRQ5 ................................................................71 
Figure 5.3   Flowchart of Procedure up to Interrupt Acceptance  in Interrupt Control Mode 0......77 
Figure 5.4   Flowchart of Procedure Up to Interrupt Acceptance in Control Mode 2.....................79 
Figure 5.5   Interrupt Exception Handling ......................................................................................80 
Figure 5.6   Conflict between Interrupt Generation and Disabling .................................................83 
 
Section 6   PC Break Controller (PBC) 
Figure 6.1   Block Diagram of PC Break Controller.......................................................................86 

Summary of Contents for H8S/2627






























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for H8S/2627

C4i U1000 User Manual preview
U1000
Brand: C4i Pages: 8
ekwb EK-FC780 GTX Jetstream Installation And Mounting Manual preview
EK-FC780 GTX Jetstream
Brand: ekwb Pages: 2
Novus NVIP- NVRA0104/GO User Manual preview
NVIP- NVRA0104/GO
Brand: Novus Pages: 44
S&T kontron KBox E-420-R1K/V1K User Manual preview
kontron KBox E-420-R1K/V1K
Brand: S&T Pages: 82
Delta Electronics Through Hole Power Inductors 1411 Product Specifications preview
Through Hole Power Inductors 1411
Brand: Delta Electronics Pages: 1
NXP Semiconductors UM10301 PCA8565 User Manual preview
UM10301 PCA8565
Brand: NXP Semiconductors Pages: 54
Z-Com ZCN-1523H-5-16 Quick Installation Manual preview
ZCN-1523H-5-16
Brand: Z-Com Pages: 18
Promise Technology VTrak J310S Quick Start Manual preview
VTrak J310S
Brand: Promise Technology Pages: 26
National Instruments PXI Terminal Block NI TB-2709 Installation Manual preview
PXI Terminal Block NI TB-2709
Brand: National Instruments Pages: 12
Sony Ericsson GC83 Specification preview
GC83
Brand: Sony Ericsson Pages: 2
Microtek MiniLink Operation Manual preview
MiniLink
Brand: Microtek Pages: 25
e-con Systems See3CAM 30 Z10X Application User'S Manual preview
See3CAM 30 Z10X
Brand: e-con Systems Pages: 14
Intel SRCSASPH16I - RAID Controller Hardware Manual preview
SRCSASPH16I - RAID Controller
Brand: Intel Pages: 28
BiPOM Electronics CG9103-2RS232-1USB User Manual preview
CG9103-2RS232-1USB
Brand: BiPOM Electronics Pages: 8
ADLINK Technology aTCA-9710 User Manual preview
aTCA-9710
Brand: ADLINK Technology Pages: 86
IBM TSO/E REXX User Manual preview
TSO/E REXX
Brand: IBM Pages: 242
S&T Kontron OSM-S i.MX8M Mini User Manual preview
Kontron OSM-S i.MX8M Mini
Brand: S&T Pages: 41
Lanner ICS-I372 User Manual preview
ICS-I372
Brand: Lanner Pages: 80

Brands by name

Popular brands

Load more brands