Hioki MR8740-50, Instruction Manual

Page: 103 / 238

97
5
Configuring the Trigger Settings
The trigger function allows you to start and stop measurements using specific signals.
When recording is started by specific signals, it is called “The instrument is triggered.”
In this chapter, the mark represents the point the start trigger is activated.
In the descriptions of each trigger source, the mark represents a point each trigger condition is
satisfied and a point each trigger is generated.
When the real-time save is set to
[On] , you cannot use the trigger function.
> [Trigger] > [Common]
Operation available on the [Trigger] screen
Configuring the logic trigger settings
(p. 114)
• Logic-trigger satisfaction conditions
• Trigger filter
• Trigger pattern
Configuring the analog trigger settings
(p. 106)
• Level trigger
• Window trigger
• Period trigger
• Glitch trigger
• Voltage drop trigger
Configuring the trigger setting
• Trigger timing (p. 100)
• Pre-Trigger (p. 102)
• Trigger satisfaction condition (logical AND or OR
operation) among the trigger sources (p. 105)
Configuring the interval trigger settings
(p. 116)
Configuring the external trigger settings
(p. 118)
Forcible trigger (p. 118)
Trigger output (p. 213)
Configuring the trigger source settings
5 Configuring the Trigger Settings
5
Configuring the
Trigger Settings