Hioki MR8740-50, Instruction Manual

Page: 74 / 238

68
Configuring Generator-Module-Specific Settings
Offset
Allows you to set an offset of the output sine wave.
Accuracy of the output voltage, which consists of amplitude and an offset value, is guaranteed in
the range of −10 V to +10 V.
An output waveform will appear with its upper parts limited to about +14 V and lower about −14 V
when the sum of the amplitude and offset value is set to out of the accuracy-guaranteed range.
−10.000 V
to
+10.000 V
4
Choose whether to output a waveform.
Select a state at the time when no waveform is outputted
OFF (OPEN) 
Does not output any waveform
Disconnect the output terminals from the internal circuit and short-circuits the terminal.
Internal
circuit
Output
terminal
OFF (SHORT)
Does not output any waveform
Disconnect the output terminals from the internal circuit and short-circuits the terminal.
Internal
circuit
About 20
Ω
Output
terminal
ON Outputs a waveform
5
Click
[Send setting]
.
The instrument confirms the settings and outputs a waveform.