Hioki MR8740-50, Instruction Manual

Page: 25 / 238

19
2
Operating the Waveform Screen
and Analyzing Data
You can analyze measured data with various functions including cursor measurement of input
waveforms and searches on the waveform screen. You can also change measurement conditions
or other settings on this screen.
Operation available on the waveform screen
Changing the display magnification of
waveforms
• Magnifying/demagnifying waveforms (p. 29)
• Magnifying a part of waveforms horizontally
(p. 33)
Using the trace cursors and horizontal
cursors
• Reading measured values (p. 20)
Moving the waveform display position
• Moving waveforms by dragging them
• Moving waveforms with the scroll bar
You can display or hide waveforms with [CH Info] set to [On] .
You can also change waveform color.
• Clicking [Color] allows you to change the waveform display color.
• Clicking [Disp.] toggles between showing and hiding a waveform.
• Right-clicking [Disp.] toggles between showing and hiding waveforms acquired across all
channels.
Setting [CH Info] to [Level Monitor] allows display values of signals being inputted into measuring
modules.
2 Operating the Waveform Screen and Analyzing Data
2
Operating the W
aveform Screen and
Analyzing Data