Hioki MR8740-50, Instruction Manual

Page: 80 / 238

74
Configuring Generator-Module-Specific Settings
Configuring Model U8794 VIR Generator Unit settings
Choose
[11:U8794]
.
Notch frequency
Choose a power frequency according to the power frequency in your region.
An incorrect power frequency setting causes measured values to be unstable.
50  Allows you to set the notch frequency at 50 Hz.
60
Allows you to set the notch frequency at 60 Hz.
Mode
Allows you to choose an output type.
V  DC voltage
I DC current
R Resistance (simulated)
AC
AC voltage
Specifying voltage values
Enter an output DC current value.
−0.1 V
to
5.3 V
The output current range of −5 mA to +5 mA.
CAUTION
The instrument accepts a load resistance of 1 k
Ω
or more. Do not connect a load
resistance lower than the permissible value or short-circuit an output terminal. Damage
to the instrument could result.