Hioki MR8740-50, Instruction Manual

Page: 138 / 238

132
Jump to the Specified Position
6.4 Jump to the Specified Position
The display can jump to the specified time, trace cursor position, event number, trigger point, or
search mark.
>
1
3
2
1
In the [Method] area, click [Jump] to set the search method to the jump method.
2
Click the [Type] box, and then from the list, choose a type to jump to.
Event mark

Allows you to enter an event number to jump to in the [Event mark number] box.
Cursor
Allows you to select a position, at which a trace cursor is specified, the display is to
jump to.
Time Time Allows you to enter an absolute time to jump to when ( [System]
> [Env.] >) [Time value display] is set to [Date] .
Time from trigger
point
Allows you to enter a time relative to the trigger point to jump to
when (
[System]
>
[Env.]
>)
[Time value display]
is set to
[Time]
or [Mod 60] .
Points Allows you to enter the number of points to jump to in the [Points]
box when measurement is performed using the external sampling
or when ( [System] > [Env.] >) [Time value display] is set to
[Samples] .
Trigger The display jumps to the start trigger point.
Search number Allows you to enter a search number to jump to in the [Search number] box.
3
Click [Execute] .
The instrument put search marks
( )
at positions where the search condition is satisfied.
When [Type] is set to [Event mark] , you can jump to an event mark
( )
position.
When [Type] is set to [Search number] , you can jump to a search mark
( )
position.
The jump-destination switching panel appears on the waveform screen.
4
Switch jump destinations using the [Search Pos.] switching panel to check jump results.
You can switch the retrieved positions by clicking [<] or [>] .