Hioki MR8740-50, Instruction Manual

Page: 139 / 238

133
7 Numerical Calculation Function
7
Numerical Calculation Function
The instrument makes calculations using acquired waveform data to numerically displays
calculation results on the waveform screen. The instrument can evaluate these calculation results
on a pass/fail basis.
> [Calculation] > [Numerical calculation]
Operation available on the [Numerical calculation] screen
Numerical Calculation
• Average value
• RMS
• P-P
• Maximum
• Time to maximum
• Minimum
• Time to minimum
• Period
• Frequency
• Rise time
• Fall time
• Standard deviation
• Area
• X-Y area
• Time to level
• Level at time
• Pulse width
• Duty ratio
• Pulse count
• Arithmetic operations
• Time difference
• Phase contrast
• High level
• Low level
• Intermediate value
• Amplitude
• Overshoot
• Undershoot
• +Width
• −Width
• Burst width
• Accumulation
• Angle of XY waveform
(33 types in total)
• Calculation using the data
between the cursors
Numerical calculations can be
performed using data within the
range specified with the trace
cursors.
For details on arithmetic
expressions, refer to “Calculation
target channels and setting contents
of calculation conditions for each
calculation type” (p. 139).
Evaluating numerical calculation results
on a pass/fail basis (p. 148)
Evaluating numerical calculation results by
comparing them with specified reference ranges,
giving pass or fail judgments.
The instrument can simultaneously execute up to 108
types of numerical calculations. When the scaling
function is enabled, the instrument makes calculations
using scaled values.
7
Numerical Calculation Function