Hioki MR8740-50, Instruction Manual

Page: 166 / 238

160
Waveform Calculation Procedure
8.1 Waveform Calculation Procedure
The following two methods are available:
Automatically making
calculations after
measurement
You have to configure the waveform calculation settings before
starting measurement.
(not available when the real-time save is set to on)
Making calculations using
existing data
The instrument can make calculations using waveform data that has
already been acquired or that saved on storage devices.
Performing calculation during measurement
Configuring the calculation
settings
Configure the calculation settings on the [Waveform
calculation] screen.
(p. 162)
Starting a measurement
Acquiring data When a trigger condition is satisfied, the instrument
starts to acquire data.
(If no trigger setting is configured, clicking the start icon allows
the instrument to start to acquire data.)
Calculation The message [Calculating] appears on the screen status
bar.
The instrument calculates the data, No. 1 through No. 108 in
turn
(To force-quit the calculation, click the stop icon.)
Displaying calculation
results
The instrument displays results on the waveform screen.
(Saving results) (When the auto-save is set to [On] )
The instrument automatically saves calculation results.
Finishing the measurement