Hioki MR8740-50, Instruction Manual

Page: 149 / 238

143
Configuring the Numerical Calculation Settings
Calculation type Setting Description Example of screen
Level at time Target channel
(Analog, logic, waveform
calculation)
Allows you to specify
calculation target
channels.
Method: Negative
Allows you to set the
time-specifying method.
Time  Time
Allows you to enter a
time for obtaining a
measured value with
the trigger point position
fixed at zero.
Calc. No. Calculation
No.
Allows you to choose
a calculation number
when you use numerical
calculation results.
You cannot specify a
number that exceeds
the calculation number
you specify.
Specifying a range is
not available.
+Width
−Width
Target channel
(Analog, waveform
calculation)
Allows you to specify
calculation target
channels.
Filter(samples)
( Off  , 10 to 10,000 )
Allows you to enter
duration used to
determine that a
waveform crosses the
specified level.
Only if a waveform does
not cross the level again
within the specified filter
duration after it has
crossed the level, the
waveform is considered
to have crossed the
level.
This is useful to
eliminate false level-
crossing events caused
by noise.
Stat. Top  Detects a value
obtained first from the
beginning within the
specified range.
Average Calculates the
average, maximum, or
minimum value for each
parameter within the
specified range.
Max
Min
7
Numerical Calculation Function