Hioki MR8740-50, Instruction Manual

Page: 203 / 238

197
Sending Data to a Computer With the FTP Client Function
Configuring the FTP client setting with the instrument
> [System] > [Comm.]
1
Click [FTP Client] .
The setting dialog box will appear.
2
3
4
5
6
7
2
Click the [Server] box and the [Port] button in turn.
Click the boxes to open the touch key or the numeric input dialog box.
Enter a computer name or an IP address in the [Server] box. In the [Port] box, enter a port number with which
the FTP server is operating if the number is not the standard number of 21.
3
Enter a directory name in the [Directory] box.
Choose a directory of the FTP server you would like to save data into.
4
Enter a login name and password to use for logging in to the FTP server in the [Login] and
[Password] box, respectively.
Enter the user name and password specified for the FTP server of the computer.
Refer to “Configure the access user setting” (p. 196).
5
Click the [PASV Mode] .button to choose a PASV mode setting.
To establish communications in PASV mode, set it to [On] .
6
Click any of the buttons in the [Adding] area, and choose an identifier.
Click the buttons to add identifiers to the file name.
• No identifiers are added when you select a file to be sent on the file screen. Files with the same name are
overwritten.
• When you have configured the setting to append numerical calculation results to existing files (when you set
the [Calculation result] button to [On] or choose [Append] in the [File] box), no identifiers representing
time of day are added.
• Moreover, if a file with the same name exists, the instrument tries to append the file.
• No button in the [Adding] area is enabled, a file with the same name is overwritten when it exists. Note that
all files with the same name will be overwritten if [Date&Time] is disabled with the continuous measurement
setting and some others.
7
Click the [UTF-8] button to choose an UFT-8 support setting.
11
Connecting the Instrument to Computers