Hioki MR8740-50, Instruction Manual

Page: 88 / 238

82
Data That Can Be Saved and Loaded
4.1 Data That Can Be Saved and Loaded
Files that exceed 2 GB cannot be saved.
Data saved with another instrument cannot be loaded onto the instrument.

:
Enable, ‒
:
Disable
File type
File
format
File extension and
description
Saving
Loading
Loading
on a
computer
Auto Manual
Setting data*
1
Binary .SET
Setting data
(measurement
conditions)
–
 
–
Waveform data*
2
The data of whole
waveforms or a part
of waveforms within
the range between
the trace cursors
(acquired in the
instrument)
Binary
MEM Binary data
  
‒ * 3
FLT
Waveform data in
floating-point format
 
– –
Text
CSV,
TXT
*
6
Text data
 
–

Waveform
managing data*
4
(Division save)
(Index file) IDX
Index data of the
division save
  
–
Screenshot,
waveform image
BMP*
5
BMP Image data
 
–

PNG*
5
PNG
Image data (PNG
format)
 
–

JPEG*
5
JPEG
Image data (JPEG
format)
 
–

Numerical
calculation result
Text
CSV,
TXT
*
6
Text data
 
–

*1: The instrument automatically loads data at the time of startup. (p. 84)
*2: To load data with the instrument: Save the data in binary format. Waveform data and a part of
measurement settings data are saved.
Save the data in binary format. Waveform data and a part of
measurement settings data are saved.
To load data with a computer: Save the data in text format. (p. 83)
To save a part of waveforms: Specify a saving range with trace cursors. (p. 20)
*3: Data can be loaded with Wave Viewer (Wv).
*4: To load divided waveform data, load the index data (IDX).
*5: BMP format: This is one of the standard Windows
®
image file format. Various graphics programs can
open these files.
PNG format: Internationally standardized image file format conforming to ISO/IEC15948
JPEG format: Internationally standardized image format conforming to ISO/IEC10918
*6: When you choose a separator other than [Comma ,] in [Region] , files are saved with the .TXT extension.
(p. 179)