Hioki MR8740-50, Instruction Manual

Page: 112 / 238

106
Triggering the Instrument Using Analog Signals (Analog Trigger)
5.6 Triggering the Instrument Using Analog Signals
(Analog Trigger)
This section explains how to configure the analog trigger settings and types of the analog triggers.
> [Trigger] > [Source]
1
1
Click a trigger source you want to specify.
The setting dialog box appears.
3
4
2
2
Click the [Channel] box, and then from the list, choose a channel you want to set a trigger
condition for.
3
Click the [Type] box, and then choose a trigger type from the list.
Off  , Level , In , Out , Voltage drop , Period-in , Period-out , Glitch
4
Configure each trigger-type-specific setting.