4-12
SECTION 4 –
ENGINE AND DRIVE SYSTEMS
•
Slide the red safety lever (located on the
Parking Brake Switch) DOWN (Back)
and press top of switch DOWN.
NOTE: When the Parking Brake is engaged,
a parking brake indicator (located on
the top left-hand side of each
Machine Display page) and the
Parking Brake Switch will illuminate.
To Disengage the Parking Brake
NOTE: If the Hydrostatic Drive Control
Handle is out of neutral while the
parking brake is engaged, the
following warning message will
appear on the Machine Display.
Press OK to acknowledge.
•
To disengage the Parking Brake and
raise the Ladder
, press and hold the
Decel Pedal (located to the lower right-
Hydrostatic Drive Control Handle
-Typical View
N
Parking Brake Switch
(Located near the Hydrostatic
Drive Control Handle)
-Typical View
NOTICE
The Decel Pedal must be held in the
DOWN position while disengaging the
parking brake.
Parking Brake Indicator
(Located on the top left-hand
side of each Machine Display page)
Parking Brake Warning Message
