SECTION 7 –
SPRAY SYSTEMS
7-9
•
To Disable
, press the corresponding
Auto or Manual Button to the OFF (gray)
position or press any one of the following
boom control switches (located on the
Hydrostatic Drive Control Handle):
- Transom Switch (Up/Down)
- Left or Right-Hand Boom Switch (Up/
Down)
NOTE: If the NORAC System becomes
inoperable, the Auto and Manual
Fold functions will still operate.
Enabling/Disabling NORAC in
the Ag Leader
®
Display
-If Equipped
•
To Enable
, press the Auto/Manual But-
ton (located on the main “Run Screen”)
to the ON (green illuminated position).
NOTE: When the system is engaged, the
boom image will change from black
to blue.
•
To Disable
, press the Auto/Manual But-
ton to the OFF (white) position or press
any one of the following boom control
switches (located on the Hydrostatic
Drive Control Handle):
- Transom Switch (Up/Down)
- Left or Right-Hand Boom Switch (Up/
Down)
NOTE: When the system is disabled, the
boom image will change from blue to
black.
NOTE: If the NORAC System becomes
inoperable, the Auto and Manual
Fold functions will still operate.
NORAC/Ag Leader System
Settings
-If Equipped
(Soil/Crop Mode, Target Height, and
Sensitivity)
NOTE: Settings may be adjusted through
the main Run Screen by pressing the
Boom Image or the Settings Button
(wrench icon), depending on model.
Refer to the NORAC or Ag Leader
manufacturer’s operation manual for
further information.
Auto/Manual Buttons - NORAC
(Located on the main “Run Screen”)
-Typical View
* Your monitor may vary in
appearance, depending on model
Auto/Manual Button - Ag Leader
(Located on the main “Run Screen”)
-Typical View
* Your monitor may vary in
appearance, depending on model
