SECTION 5 –
HYDRAULIC SYSTEMS
5-8
7. Observe tread width - either by the tread
decals (located on each leg), or the indi-
vidual readings on the Tread Adjustment
Screen.
In addition, front and rear tread width is
also displayed on the Machine Display
Auxiliary Controls Page, which gives the
current measurement of the furthest out
reading.
8. Release the In or Out Buttons when
desired tread width is achieved.
Hydraulic Auto Tread Adjust
1. Engage the parking brake.
2. Start the engine.
3. Press the Field/Road Button (located on
the Machine Display Home Page) and
change the machine’s drive state to
FIELD.
NOTE: The drive state of the machine
cannot be changed unless the
Hydrostatic Drive Control Handle is
in the NEUTRAL position (and
machine speed is less than 0.5 mph/
0.8 km/h).
NOTE: The selected drive state will
illuminate.
In/Out Buttons
Tread Decal
(Located on each leg)
-Typical View
Front/Rear Tread Width Indicators
(Located on the Machine Display
Auxiliary Controls Page)
Front
Rear
Field/Road Button
(Located on the Machine Display
Home Page)
