7-26
SECTION 7 –
SPRAY SYSTEMS
7. On the Options Screen (2/5), select
“Headland Assist”.
8. On the Options Screen (2/5), press the
selection area (next to “Headland Trig-
ger”) and select REMOTE to enable
NORAC through the End Row Manage-
ment Switch.
9. On the Options Screen (2/5), press the
selection area (next to “Headland
Mode”) and select MAIN or WINGS.
SPRAY BOOM - REAR
-If Equipped
NOTE: The Rear Spray Boom is controlled
through the center spray section of
the front boom.
Installing the Rear Boom
NOTE: It is recommended that two persons
install the Rear Boom.
1. Ensure solution supply is OFF.
2. Route solution line from the front boom
to the rear boom (A).
Options Screen (2/5)
-Typical View
Options Screen (2/5)
-Typical View
Options Screen (2/5)
-Typical View
Rear Boom Installation
-Typical View
