SECTION 8 –
DUAL PRODUCT SPRAY SYSTEMS
8-24
9. When finished rinsing the tanks, press
the Rinse Switch to the OFF (mid) posi-
tion.
Step 2 - Spray Diluted Water from
Tanks 1 and 2
PRIMARY SYSTEM
1. Press and hold the Agitation Valve
Switch (located on the side console) in
the DOWN (Closed) position.
2. Press the Main Tank Valve Switch
(located on the side console) in the UP
(Open) position.
3. Press the individual Boom Solution
Valve Switches (located on the Single
Product Section Keypad) to the ON
(non-illuminated) position.
NOTE: Each Boom Solution Valve Switch is
equipped with an indicator light and
will illuminate when the
corresponding Boom Solution Valve
is OFF.
4. Press the Master Spray Switch (located
on the Hydrostatic Drive Control Handle)
in the ON position.
5. Continue spraying until all diluted water
is removed from tanks.
“+” Pump Speed/Rate Switch
(Located on the side console)
-Typical View
Boom Solution Valve Switches -
Single Product Section Keypad,
Sections 1-9
(Located on the side console)
-Typical View
* Used with 9-section wet boom
Master Spray Switch
(Located on the Hydrostatic
Drive Control Handle)
-Typical View
