SECTION 8 –
DUAL PRODUCT SPRAY SYSTEMS
8-26
10. Turn on the spray system console.
11. Ensure “Dual Product Machine Configu-
ration” is selected, then press START
JOB.
12. Press and hold the Secondary Product
Button (located on the spray system con-
sole) in the ON position.
13. Press and hold the Secondary Solution
Pump Button (located on the spray sys-
tem console) in the ON position until the
“pump control screen” appears.
14. Press the Manual (MAN) Rate Control
Button (located on the spray system con-
sole).
Master Spray Switch
(Located on the Hydrostatic
Drive Control Handle)
-Typical View
Spray System Console - Getting Started
-Typical View
* Your machine may vary,
depending on available equipment
Secondary Product Button
(Located on the spray system console)
-Typical View
* Your machine may vary,
depending on available equipment
Solution Pump Button -
Secondary
(Located on the spray system console)
-Typical View
* Your machine may vary,
depending on available equipment