8-31
SECTION 8 –
DUAL PRODUCT SPRAY SYSTEMS
NOTE: Two power ports (located near the
front fill assembly) are provided for
chemical pump connection.
5.
When finished filling the tank
, close
the Solution Tank Fill Valve.
6. Remove solution supply from the Solu-
tion Tank Fill Port.
7. Reinstall fill port cap.
8. Raise the Front Fill Assembly to stored
position, ensuring it “clicks” into locked
position.
Filling the Rinse Tank
NOTE: Rinse Tank Capacity = 100 gallons
(378L).
1. Pull the Front Fill Release Lever (located
beneath front end of machine) OUT
(toward operator) to unlock the Front Fill
Assembly.
2. Lower the Front Fill Assembly.
3. Remove fill port cap from the Rinse Tank
Fill Port.
4. Connect operator-supplied connection to
the Rinse Tank Fill Port.
Power Ports
(Located near front fill assembly)
-Typical View
Front Fill Release Lever
(Located beneath front end of machine)
-Typical View
Front Fill Assembly
(Lowered position shown)
-Typical View
• Rinse Tank
Fill Port
• Rinse Tank
Fill Valve