8-21
SECTION 8 –
DUAL PRODUCT SPRAY SYSTEMS
Step 3 - Rinsing the Boom and Nozzles
1. Press the Main Tank Valve Switch
(located on the side console) in the
DOWN (Closed) position.
NOTE: When rinsing the boom and nozzles,
ensure the Boom Solution Valve
Switches (located on the Single
Product Section Keypad) are in the
ON position before activating the
Rinse Switch.
2. Press the Rinse Switch (located on the
side console) in the UP position to rinse
the boom and nozzles.
NOTE: A Rinse Mode Indicator is located on
the Machine Display Home Page -
Field Mode and will display current
rinse mode status (TANK or BOOM).
3. When finished rinsing the booms, press
the Master Spray Switch (located on the
Hydrostatic Drive Control Handle) in the
OFF position.
4. Press the Solution Pump Switch (located
on the side console) in the DOWN (Off)
position.
5. When rinsing is complete, press the
Rinse Switch to the OFF (mid) position.
NOTICE
Do not allow the solution pump to run dry
for a prolonged period of time. Failure to
comply may result in pump damage.
Main Tank Valve Switch
(Located on the side console)
-Typical View
Rinse Switch
(Located on the side console)
-Typical View
Rinse Mode Indicator
(Located on the Machine Display
Home Page - Field Mode)