SECTION 3 –
CAB
3-42
•
Enter desired value, then press
ACCEPT.
•
Press OK.
Refer to “Hydrostatic Drive” provided in
the
Engine and Drive Systems Section
elsewhere in this manual for further
information.
Decel Pedal Minimum Speed
The Decel Pedal (located to the lower
right-hand side of steering column) is used
for speed deceleration (e.g. when nearing an
end row).
NOTE: The Decel Pedal is NOT a brake! It is
designated for speed reduction only.
To Adjust Decel Pedal Minimum Speed
•
Press the Throttle Button (located on the
Settings Page).
•
On the “Throttle Settings” screen, press
EDIT (next to Decel Pedal Min Speed).
•
Enter desired value, then press
ACCEPT.
•
Press OK.
All-Wheel Steer (AWS) ^
-If Equipped
The AWS Button is located on the Home
Page - Field Mode. Enable AWS by pressing
the button in the ON (illuminated) position.
An AWS indicator (located below the
speedometer) will illuminate when AWS is
activated (requiring all conditions to be met).
All conditions must be met before AWS
will activate. First, the machine must be in
Field Mode, and second, machine speed
must be less than AWS Shutoff Speed (mph-
km/h). If these conditions are not met, the
AWS Button will remain ON, but the AWS
indicator will turn OFF, and the machine will
be operating in conventional steering mode.
Throttle Settings Screen
Throttle Button
(Located on the Settings Page)
Throttle Settings Screen
• AWS Button
• AWS Indicator
