7-22
SECTION 7 –
SPRAY SYSTEMS
NOTE: Center position value is 0 inches/cm.
Enabling/Disabling NORAC
®
in
the Pulse Display
-If Equipped
NOTE: Hagie Manufacturing Company
recommends turning the NORAC
Monitor OFF when traveling from
one field to the next. A power switch
is located on the back side of the
monitor.
•
To Enable
, press the corresponding
Auto or Manual Button (located on the
main “Run Screen”) to the ON (green
illuminated position).
•
To Disable
, press the corresponding
Auto or Manual Button to the OFF (gray)
position or press any one of the following
boom control switches (located on the
Hydrostatic Drive Control Handle):
- Transom Switch (Up/Down)
- Left or Right-Hand Boom Switch (Up/
Down)
NOTE: If the NORAC System becomes
inoperable, the Auto and Manual
Fold functions will still operate.
Enabling/Disabling NORAC in
the Ag Leader
®
Display
-If Equipped
•
To Enable
, press the Auto/Manual But-
ton (located on the main “Run Screen”)
to the ON (green illuminated position).
NOTE: When the system is engaged, the
boom image will change from black
to blue.
Roll Command Buttons (CW/CCW)
(Located on the Machine Display
Auxiliary Controls Page)
NORAC Monitor
-Typical View
Auto/Manual Buttons - NORAC
(Located on the main “Run Screen”)
-Typical View
* Your monitor may vary in
appearance, depending on model
