10-27
SECTION 10 –
MISCELLANEOUS
To Assemble/Install Brush Curtain:
10. Place Curtain Mounting Bracket (bend
side up) beneath edge of Brush Curtain,
aligning the pre-drilled holes on each.
11. Arrange Curtain Support Strips along the
edge of Brush Curtain, aligning the pre-
drilled holes.
NOTE: Ensure the notches of each Curtain
Support Strip are facing inward
(where they will later be adjoined
together).
12. Starting at the end of the assembly,
insert a 1/8” stainless steel rivet through
the top of Curtain Support Strip, Brush
Curtain, and Curtain Mounting Bracket.
NOTE: Ensure Curtain Mounting Bracket
bend is facing UP, as shown in the
following photo.
13. Use a rivet gun to secure.
14. Repeat process to secure the remainder
of the assembly, ensuring that the
notches of Curtain Support Strips adjoin
together.
15. Install the assembled Brush Curtain onto
the previously installed Hanger Pins
(located on Panels 4 and 5).
• Curtain
Support
Strips
• Curtain
Mounting
Bracket
-Typical View
Brush Curtain Assembly
-Typical View
-Typical View
