10-25
SECTION 10 –
MISCELLANEOUS
6. Using a 1/2” wrench or socket, tighten
the belly shield nuts and bolts, as shown.
7. Repeat previous steps to install Panels 2
and 3.
Installing Belly Shields (4-6) and
Brush Curtain
1. Install Securement Pin Assembly
(Hanger Pin and Securement Pin) onto
each Retaining Bracket (located along
frame).
2. Starting with Panel 4, install Support
Hook Assemblies into the correspond-
ing Hinge Bushings (located along
frame).
3. Install Cotter Pin onto the end of each
support hook.
NOTE: Ensure belly shield nuts and bolts
are loose.
4. Repeat Steps 2-3 to install Panels 5 and
6, ensuring belly shield nuts and bolts
are loose.
5. Install Hanger Pins along side of Panels
4, 5, and 6.
Securement Pin
(Installed into Hanger Pin)
-Typical View
-Typical View
Retaining Bracket/
Securement Pin Assembly
-Typical View
• Retaining
Bracket
• Securement Pin
• Hanger Pin
-Typical View
• Hinge Bushing
• Cotter
Pin
• Support Hook
• Belly Shield
Nuts/Bolts