SECTION 3 –
CAB
3-18
Refer to the
Engine and Drive Systems
and Spray Systems Sections
elsewhere in
this manual for further information.
Transom Switch - Up/Down
The Transom Switch (located on the
Hydrostatic Drive Control Handle) is used to
raise and lower the main lift.
Left and Right-Hand Boom Switches
The Left and Right-Hand Boom Switches
(located on the Hydrostatic Drive Control
Handle) are used to raise, lower, extend, and
retract the spray booms.
Master Spray Switch
The Master Spray Switch (located on the
Hydrostatic Drive Control Handle) activates
the boom solution valves.
End Row Management Switch
The End Row Management Switch
(located on the Hydrostatic Drive Control
Handle) is a programmable switch that
enables various functions (i.e. All-Wheel
Steer, Auto Steer, Master Spray, and
NORAC® Enable) when the switch is
depressed.
NOTE: End Row Management functions are
disabled in Road Mode.
Refer to “Machine Display” provided
elsewhere in this section for programming
information.
Shift Up/Down Switches
The Shift Up/Down Switches (located on
the Hydrostatic Drive Control Handle) are
used for speed range selection.
Refer to “Hydrostatic Drive” provided in
the
Engine and Drive Systems Section
elsewhere in this manual for further
information.
Hydrostatic Drive Control Handle
-Typical View
Front View
Side View