SECTION 10 –
MISCELLANEOUS
10-14
Foam Marker Connection
-If Equipped
NORAC Connection
-If Equipped
9. Press and hold the Transom Switch
(located on the Hydrostatic Drive Control
Handle) in the DOWN position and
slowly lower the boom/transom assem-
bly until Attachment Hooks clear the
Mounting Pins.
NOTE: If the air bags are inflated, a “bounce
back” effect may be felt when the
weight of the boom has been
relieved from the machine. Once the
air bags have cycled, the machine
will adjust to the new weight.
10. Engage the parking brake.
11. Turn the engine OFF before discon-
necting any hoses or electrical lines!
Foam Marker Connection
(Located on the front
right-hand side of machine)
-Typical View
NORAC Connection
(Located on the front
right-hand side of machine)
-Typical View
Transom Switch - DOWN
(Located on the Hydrostatic
Drive Control Handle)
-Typical View
Attachment Clearing Mounting Pin
-Typical View
