background image

3A0153E

Operation

ProShot

 Cordless Paint Sprayer

U.S. Patent No. D625,775 S; U.S. Patent No. 6,619,569; U.S. Patent No. D630,708 S;
Community Registration #001228255; India Patent No. 230058; Taiwan Patent No. D142952
China Patent No. ZL201030238948.3; and other patents pending

- For portable spray applications of water-based and oil-based 

(mineral spirit-type) architectural paints and coatings only

 -

- Not for use in explosive atmospheres -

Model 258865

Maximum Working Pressure 2000 psi (137 bar, 13.7 MPa)

Model 258859

Maximum Working Pressure 2000 psi (137 bar, 13.7 MPa)

IMPORTANT SAFETY INSTRUCTIONS

Read all warnings and instructions in this 
manual. Save these instructions.

EN

ti14773a

WARNING

WARNING

WARNING

WARNING

Use only water-based or oil-based (mineral spirit-type) materials with flash point greater than 100° F 
(38° C). 

Do not use materials which state “FLAMMABLE” on the packaging. For more information about 

your material, request MSDS from distributor or retailer.

Use oil-based material outdoors or in a well-ventilated indoor area with a flow of fresh air.

Spraying certain materials may cause static build-up in the sprayer that can result in static shock to 
the user.

 If this occurs, first ensure the material has a flash point greater than 100° F (38° C) and does not 

state that it is FLAMMABLE anywhere on the package. If still feeling a static shock, the material likely con-
tains a non-mineral spirits fluid such as, but not limited to, xylene, toluene, or naphtha, which can build up 
static. Switch to an alternative material.

Summary of Contents for ProShot 258859

























Reviews: