Page 123
Issue 08/2013
Operation
Troubleshooting
6.10.6
Overspeed
LED 6
The LED is flashing
y
The generator is operating at an overspeed.
After releasing the load, it is not possible to switch the plate back on
again.
The LED goes out once the speed is within the tolerance limits
again.
Troubleshooting measures
>
Operate the generator at a speed within the permissible tolerances.
Ö
Generator drive types, page 28
Important
Mechanical damage
y
The generator can sustain mechanical damage caused by
excessive speeds.
►
Make sure that the machine is permanently operated in the
nominal speed range.
Note
Excessive speeds can also lead to a system fault with the
diagnosis: overvoltage fault (fault code: 10).
