Page 55
Issue 08/2013
iMAPLA system description
GTS type designation and identification
4.10.2
Serial number switch box / controller
The serial number of the electrical controller / switch box is stamped into the
cooling element on the plug side (connection side). This is used for the exact
identification of the electronic components and its programmed software.
Serial number, iMAPLA switch box
Ø 1234 INT 13 - 2 ISO
ISO = fitted with optional insulation monitor
2 = number of poles, generator (2=2-pole, 4=4-pole)
(if this entry is not present, the following
generally applies: 8-20kW=2-pole,
21-30 kW 4-pole)
13 = programmed power class of
i
MAPLA in kW
INT =
i
MAPLA indicator (INT)
1234 = Serial number of electronic controller
(4 digits for
i
MAPLA)
Ø = hardware ID, switch box
(Ø = newer version, not used for
i
MAPLA series 2013)
Serial number, iMAPLA 2013 series switch box (with CAN Bus)
12345 I13 G2 -2 ISO Uxx
Uxx = programmed CAN report of the
controller (switch box)
ISO = fitted with optional insulation monitor
2 = Number of poles, generator 2=2-pole, 4=4-pole
(if this entry is not present, the following generally
applies: 8-20 kW=2-pole, 21-30 kW 4-pole)
G2 = Identification of the
i
MAPLA series 2013
I13 = I
g
i
MAPLA Identification
13
g
programmed power class of
i
MAPLA series 2013 in kW
(can also be less than the generator output)
12345 = Serial number of electronic controller
(5 characters for
i
MAPLA series 2013)
