GSi EVO-50, Construction Manual, Page: 84 / 222

Chapter 7: Door Assemblies
4. Install the jamb plate weldments (32) to the inside of the sidewall using M12 x 60 flange bolts (82)
and M12 flange nuts (83).
NOTE: The seal weldment (36) at the top and bottom must be installed to the inside of the sidewall.
Remember to apply rope caulk (68) around the bolt holes between the seal weldment (36)
and the sidewall .
NOTE: Refer to note in Installing the Door Weldment, page 77 for details on the specific order in
which these parts must be assembled. (The seal weldments must be installed into the
sidewall before the frames and jamb plate weldments.)
Figure 7-10 Installing the door assembly to the sidewall
31
Outer door frame weldment (NCWT0738) (2-post)
36
Seal weldment (NCTW0745) (2-post)
Outer door frame weldment (NCWT0756) (3-post) Seal weldment (NCTW0759) (3-post)
32
Jamb plate weldment (NCWT0736-BS) (2-post)
68
Rope caulk
Jamb plate weldment (NCWT0754-BS) (3-post)
69
Corrugated sealing strip
33
Inner door frame weldment (NCWT0732-BS)
(2-post)
82
M12 x 60 flange bolt with sealing washer
(S-10783)
Inner door frame weldment (NCWT0751-BS)
(3-post)
83
M12 flange nut (S-10786)
84 PNEG-5490D-2X 90' Diameter EVO-50 Beam 2X Bin