GSi EVO-50, Construction Manual, Page: 56 / 222

Chapter 6: Stiffeners
Stiffener Part Number Description
The part numbers in the following tables use an “XX” at the end of the number to represent the gauge of
the material.
Color Codes for Stiffener Gauge Identification
Refer to the below charts toto identify the stiffener gauge based on the color code painted on the ends of
the stiffeners.
Table 6-1 Color codes for stiffener gauges
Sidewall Gauge Color Code
0 No Color (Zinc)
2 Ochre
5 Fluorescent Green
6 White
8 Yellow
9 Dark Blue and Orange
10 Light Blue
11 Pink
12 Black
13 Dark Blue and Yellow
14
Dark Green
15 Red and Brown
16 Dark Blue
17 Light Blue and Pink
18 Orange
Table 6-2 Stripe color codes for stiffener gauges
Stiffener Type Stripe Color
Base Stiffener Red
Back (Laminated)
Dark Green
Insert (Laminated)
Gold
Close Punched
Light Blue
Special Galvanized 115
Fluorescent Red and
Orange
Special Galvanized 140
Florescent Pink
Special Galvanized 165
Florescent Pink and
Fluorescent Orange
12-Bolt Pattern
Stiffener
Brown
NOTE: Extra colored stripes will be centered on
the gauge color. If more than one color of
stripe is needed, they will be painted next
to each other and centered on the gauge
color.
56 PNEG-5490D-2X 90' Diameter EVO-50 Beam 2X Bin