GSi EVO-50, Construction Manual, Page: 48 / 222

Chapter 4: Assembling the Sidewall Sheets
5. Before bolting the next ring into place, apply a strip of caulk (3) along the horizontal edge of the
overlapping sheet at every overlapping seam. This will fill the space that occurs between the holes
caused by the overlapping sheets.
NOTE: Always assemble the sidewall sheets with the overlap in the same direction.
Figure 4-12 Caulking and assembling the triple laminated sidewall sheets
2
1/8" x 1/4" caulking strip (vertical) (S-4458)
4
1/8" x 1-1/4" caulking strip (stiffener hole)
(S-10716)
3
1/8" x 1/4" caulking strip (horizontal) (S-4458)
(For 14-10 gauge laminates: 13")
(For 9-5 gauge laminates: 18")
5
1/8" x 1-1/4" caulking strip (horizontal) (S-10716)
(For 14-10 gauge laminates: 7.5" to 13")
(For 9-5 gauge laminates: 10" to 18")
6. Use the supplied tube caulk to fill the larger gaps that occur with heavier gauges and laminated
gauges.
48 PNEG-5490D-2X 90' Diameter EVO-50 Beam 2X Bin