S A
审 核
杨瑞其
工 艺
日 期 2015-6-29
共 14页
第 14 页
O
PERATING INSTRUCTIONS
Each time a button is touched, a beep will sound to acknowledge the touch.
During cooking, if press CANCEL pad once or open the door, the program will be paused, then press
START pad to resume, but if press CANCEL pad twice, the program will be canceled.
After a cooking or defrosting program has completed, the oven will automatically continue to sound
three beeps every two minutes until the door is opened or the CANCEL pad is touched.
SETTING THE CLOCK
Suppose you want to enter the correct time of
day6: 00(A.M or P.M).
Steps: 1. Touch the CLOCK pad once or twice
to set the digital clock in 12 or 24 hours cycle.
2. Touch number pad “1 Minutes” 6 times.
(Touch number pad to enter time.)
3. Touch CLOCK pad again to confirm.
NOTE:
You can check the clock time while
cooking is in progress by touching the CLOCK
pad.
SETTING THE MICRO.
Suppose you want to cook for 5 minutes at 60%.
Steps:
1. Touch MICRO. pad 3 times.
2. Touch number pad “1 Minutes” five times.
COOKING
POWER
Once
100% (P10)
Twice
80% (P8)
3 times
60% (P6)
4 times
40% (P4)
5 times
20% (P2)
6 times
0 (P0)
3. Touch START pad.
NOTE:
Step 1 is not necessary for cooking at
100% power level. The maximum time can be set
is 99 minutes and 99 seconds. You can check the
power level by press MICRO. pad during cooking.
PRE-SET
Suppose you want to set the oven to start-up at 2
o’clock.
Steps:
1.
Set the cooking programs.
2.
Touch PRE-SET pad.
3.
Touch number pad “1 Minutes” twice.
4.
Touch START pad.
NOTE:
Be sure the time of day clock is set at the
correct time before programming PRE-SET.
JET
DEFROST WEIGHT
DEFROST
and
EXPRESS COOKING can not be preset.
In preset mode, the preset time can be seen by
pressing PRESET pad, if press CANCEL pad
when the display shows the time, the function is
cancelled.
PRESS MICRO.
BUTTON
8
