Genie S-60 HC, Service Manual

Page: 78 / 461

3 - 40 S-60 • S-65 • S-60 TRAX • S-65 TRAX Part No. 147753
S-60 HC • S-60X • S-60XC
December 2013 Section 3 • Scheduled Maintenance Procedures
B-24
Perform Engine Maintenance -
Ford Models
Engine specifications require that this procedure be
performed every 400 hours.
Proper engine maintenance, following the engine
manufacturer's maintenance schedule, is essential
to good engine performance and service life. Failure
to perform the maintenance procedures can lead to
poor engine performance and component damage.
Required maintenance procedures and additional
engine information are available in the
Ford DSG-423 EFI Operator Handbook
(EDI part number 1060020) OR the
Ford MSG-425 EFI Operator Handbook
(EDI part number 1020010).
Ford DSG 423 EFI Operator Handbook
Genie part number 119488
Ford MSG 425 EFI Operator Handbook
Genie part number 215322
CHECKLIST B PROCEDURES
B-25
Replace the Engine Air Filter
Element - Ford Models
Engine specifications require that this procedure be
performed every 400 hours.
Maintaining the engine air filter in good condition is
essential to good engine performance and service
life. Failure to perform this procedure can lead to
poor engine performance and component damage.
Note: Perform this procedure with the engine off.
1 Locate the engine air filter assembly.
2 Release the latches from the air cleaner canister
end cap. Remove the end cap.
3 Remove and discard the filter element.
4 Clean the inside of the canister and the end cap
with a damp cloth.
5 Install the new filter element.
6 Install the air filter canister end cap and secure
the end cap latches.
Note: Be sure the discharge valve is pointing down
when the cap is installed.