Genie S-60 HC, Service Manual

Page: 29 / 461

Part No. 147753 S-60 • S-65 • S-60 TRAX • S-65 TRAX 2 - 7
S-60 HC • S-60X • S-60XC
Section 2 • Specifications December 2013
SPECIFICATIONS
Lubrication system
Oil pressure 40 to 60 psi
(@ 2000 rpm) 1.4 to 3 bar
Oil capacity 9.5 quarts
(including filter) 9 liters
Oil viscosity requirements
-22° F to 86° F/ -30° C to 30° C 5W-30
(synthetic)
-4° F to 90° F / -20° C to 32° C 10W-40
Above 23° F / -5° C 20W-50
Units ship with 15W-40.
Extreme operating temperatures may require the use of
alternative engine oils. For oil requirements, refer to the
Engine Operator Handbook on your machine.
Oil temperature switch
Temperature switch point 220°F
104°C
Oil pressure switch
Oil pressure switch point 22 psi
1.5 bar
Deutz D2011L03i Engine
Displacement 142 cu in
2.33 liters
Number of cylinders
3
Bore and stroke
3.7 x 4.4 inches
94 x 112 mm
Horsepower 48 @ 2800 rpm
36 kW @ 2800 rpm
Firing order 1 - 2 - 3
Low idle 1500 rpm
313 Hz
High idle 2500 rpm
521.7 Hz
Compression ratio 19:1
Compression pressure 362 to 435 psi
25 to 30 bar
Governor centrifugal mechanical
Valve clearance, cold
Intake 0.012 in
0.3 mm
Exhaust 0.020 in
0.5 mm
Continuous improvement of our products is a
Genie policy. Product specifications are subject
to change without notice.