Genie S-60 HC, Service Manual

Page: 113 / 461

Part No. 147753 S-60 • S-65 • S-60 TRAX • S-65 TRAX 4 - 7
S-60 HC • S-60X • S-60XC
December 2013 Section 4 • Repair Procedures
PLATFORM CONTROLS
8 Start the engine from the platform controls and
press down the foot switch.
9 Start a timer and simultaneously move the
joystick in either direction full stroke. Note how
long it takes the function to reach maximum
speed. This is the ramp rate.
10 Compare the function ramp rate time with the
table and determine whether the ramp rate time
needs to increase or decrease.
11 Release the foot switch.
12 Activate the joystick and adjust the ramp rate.
Momentarily move the drive enable toggle
switch in the right direction to increase the time
or momentarily move the drive enable toggle
switch in the left direction to decrease the time.
Note: Each time the drive enable toggle switch is
momentarily moved, the time will change in 5%
increments from a default of 100%, with a minimum
of 50% and a maximum of 150%.
13 Repeat steps 9 through 11 for each joystick
controlled machine function.
14 Return the joystick to the neutral position and
wait for approximately 10 seconds to allow the
settings to be saved.
Result: The alarm should sound indicating that
the settings have been saved in memory.
Result: The alarm does not sound. The
minimum or maximum adjustment has been
obtained. No changes can be saved.
Note: Do not operate any machine function during
the 10 second waiting time.
15 Cycle the red Emergency Stop button off, then
back on.
Ramp rate (factory settings)
Boom up/down
transition accelerate 1 second
transition decelerate 10 seconds
S ramp accelerate 1 second
S ramp decelerate 0.45 second
Boom extend/retract
accelerate 2 seconds
decelerate 0.5 second
Turntable rotate
accelerate 2 seconds
decelerate 0.75 second
Drive
accelerate 2 seconds
decelerate to neutral 0.5 second
decelerate, change of direction 0.5 second
decelerate, coasting 0.75 second
decelerate, braking 1 second
decelerate, shift from low to high speed 1 second
decelerate, shift from high to low speed 4 seconds