Part No. 147753
S-60 • S-65 • S-60 TRAX • S-65 TRAX
3 - 7
S-60 HC • S-60X • S-60XC
December 2013
Section 3 • Scheduled Maintenance Procedures
A-1
Inspect the Manuals and Decals
Genie specifications require that this procedure be
performed daily or every 8 hours, whichever comes
first.
Maintaining the operator’s and safety manuals in
good condition is essential to safe machine
operation. Manuals are included with each machine
and should be stored in the container provided in
the platform. An illegible or missing manual will not
provide safety and operational information
necessary for a safe operating condition.
In addition, maintaining all of the safety and
instructional decals in good condition is mandatory
for safe machine operation. Decals alert operators
and personnel to the many possible hazards
associated with using this machine. They also
provide users with operation and maintenance
information. An illegible decal will fail to alert
personnel of a procedure or hazard and could result
in unsafe operating conditions.
1 Check to make sure that the operator's and
safety manuals are present and complete in the
storage container on the platform.
2 Examine the pages of each manual to be sure
that they are legible and in good condition.
Result: The operator's manual is appropriate for
the machine and all manuals are legible and in
good condition.
Result: The operator's manual is not appropriate
for the machine or all manuals are not in good
condition or are illegible. Remove the machine
from service until the manual is replaced.
Checklist A Procedures
3 Open the operator's manual to the decals
inspection section. Carefully and thoroughly
inspect all decals on the machine for legibility
and damage.
Result: The machine is equipped with all
required decals, and all decals are legible and in
good condition.
Result: The machine is not equipped with all
required decals, or one or more decals are
illegible or in poor condition. Remove the
machine from service until the decals are
replaced.
4 Always return the manuals to the storage
container after use.
Note: Contact your authorized Genie distributor or
Genie if replacement manuals or decals are
needed.
Summary of Contents for S-60 HC
