Gehl RS5-34 Service Manual Download Page 35

Page: 35 / 292

RS5-34 Telescopic Handler

ENGINE

PRINTED IN U.S.A.

201-5

913241

Alt= to hide template information
Alt+ to display template information

Template Name: OML_2_col

907871E

Template Date: 1997_02_12

STEP 20

G1159MP

If equipped, place a container under the hoses and
remove the heater hoses from the engine.

NOTE:

There is coolant trapped in the hoses and

engine that will drain when the hoses are removed.

STEP 21

G1158MP

If equipped, remove the hose adapter from the water
pump.

STEP 22

G0905148

Loosen the hose clamps (1) and remove the upper
radiator hose (2).

STEP 23

G0905149

G0905150

Remove the four mounting bolts (1) and the right side
fan guard (2).

View thousands of Crane Specifications on FreeCraneSpecs.com

Summary of Contents for RS5-34





































































































































































































































































































Search results

Summary of Contents for RS5-34

Reviews:

Related manuals for RS5-34

Brands by name

Popular brands

Gehl RS5-34, Service Manual

Search results

Summary of Contents for RS5-34

Reviews:

Related manuals for RS5-34

Brands by name

Popular brands