Gehl RS5-34 Service Manual Download Page 285

Page: 285 / 292

RS5-34 Telescopic Handler

INTERMEDIATE BOOM

PRINTED IN U.S.A.

706-3

913241

Alt= to hide template information
Alt+ to display template information

Template Name: OML_2_col

907871

Template Date: 1994_04_22

STEP 8

G1005075

Loosen and remove the two bolts and washers
securing the hose tray bracket to the intermediate
boom. Lower the hose tray and hose tray bracket.

STEP 9

G1005062

G1005053

Loosen and remove the two bolts and remove the left
side slide pad and shim from the front of the outer
boom.

STEP 10

G1005068

Loosen and remove the bolts and washers from the
two top slide pads on the front of the outer boom.

STEP 11

G1005052

Remove the two top slide pads and shims from the
front of the outer boom.

STEP 12

Using the hoist and lifting strap, apply upward
pressure on the front of the intermediate boom.

View thousands of Crane Specifications on FreeCraneSpecs.com

Summary of Contents for RS5-34





































































































































































































































































































Search results

Summary of Contents for RS5-34

Reviews:

Related manuals for RS5-34

Brands by name

Popular brands

Gehl RS5-34, Service Manual

Search results

Summary of Contents for RS5-34

Reviews:

Related manuals for RS5-34

Brands by name

Popular brands