RS5-34 Telescopic Handler
FRONT AXLE
PRINTED IN U.S.A.
503-4
913241
Alt= to hide template information
Alt+ to display template information
Template Name: OML_2_col
907871E
Template Date: 1997_02_12
STEP 15
G0905069
Loosen the two axle mounting bolts located in back
of the axle. Do not remove the nuts at this time.
STEP 16
G905071
Place two 10-ton hydraulic bottle jacks under the
fram e in the location shown and apply upward
pressure equally from side to side on each jack.
Raise until the front wheels are approximately 2
inches off the surface.
STEP 17
Adjust the jack stands to a height that will keep the
wheels approximately 2 inches off the surface when
the bottle jacks are removed.
STEP 18
Lower the bottle jacks equally and remove.
STEP 19
G0905072
Using a 5-ton floor jack, placed under the center of
the differential housing, apply upward pressure on
the axle.
NOTE:
The front axle cannot be rolled out from
under the machine on the wheels because the park
brake is spring-applied.
STEP 20
G0905056
Loosen and remove the wheel nuts from the wheel
bolts.
STEP 21
Remove both wheels and tires from the axle.
STEP 22
Rem ove the two axle m ounting nuts a nd bolts
located in back of the axle.
View thousands of Crane Specifications on FreeCraneSpecs.com
View thousands of Crane Specifications on FreeCraneSpecs.com