RS5-34 Telescopic Handler
CYLINDER REPAIR
PRINTED IN U.S.A.
605-5
913241
Alt= to hide template information
Alt+ to display template information
Template Name: OML_2_col
Rac 0-00000
Template Date: 1997_02_12
CYLINDER ASSEMBLY
STEP 20
Clean the cylinder rod threads, rod nut and all
cylinder parts in solvent and dry with compressed air.
Inspect all par ts for damag e or we ar. Re place
damaged or worn parts.
STEP 21
G1550MP
Inspect the cylinder barrel for nicks, scratches or
scoring prior to being assembled.
Use crocus cloth to remove any m inor nicks or
scratches.
STEP 22
G1551MP
Inspect the cylinder rod for any nicks, scratches or
scoring. Roll the rod on a hard flat surface to check
for any bending.
STEP 23
G1549MP
If needed, install a new bushing in the base end and
the rod end of the cylinder.
STEP 24
G1547MP
Install a new inner seal (lip to the inside of the barrel)
in the head gland.
NOTE:
Lubricate all new seals with clean hydraulic
fluid or petroleum jelly before installation.
STEP 25
G1546MP
Install a new inner wear ring in the head gland.
ROD SEAL‘
WEAR RING
View thousands of Crane Specifications on FreeCraneSpecs.com
View thousands of Crane Specifications on FreeCraneSpecs.com
