RS5-34 Telescopic Handler
INTERMEDIATE BOOM
PRINTED IN U.S.A.
706-8
913241
Template Name: OML_2_col
907871
Template Date: 1994_04_22
Alt= to hide template information
Alt+ to display template information
STEP 29
G1005048
Reinstall the two top slide pads and shims (1) to the
rear of the intermediate boom, using the lock plates
(2) and bolts (3). Use Loctite
™
271 (red) Thread Lock
(or equivalent) on the threads of the bolts and torque
to 30 ft.-lbs. (41 Nm). Bend up each end of the lock
plates.
STEP 30
G1623MP
Apply grease to the inside bottom and top surfaces of
the intermediate boom section where the pads of the
inner boom will contact when assembled. Use a
brush attached to a rod or pole (as shown) to reach
inside the boom.
STEP 31
G1005084
Reinstall the inner boom section into the intermediate
boom. See Section 703 of this manual for correct
procedure.
3
3
3
3
2
2
1
1
View thousands of Crane Specifications on FreeCraneSpecs.com
View thousands of Crane Specifications on FreeCraneSpecs.com