![background image](http://html1.mh-extra.com/html/gehl/rs5-34/rs5-34_service-manual_2205870180.webp)
RS5/6-34 Telescopic Handler
HYDRAULICS
PRINTED IN U.S.A.
601-42
913241/BP0508
Template Name: OML_2_col
0-00000
Template Date: 1994_04_22
Alt= to hide template information
Alt+ to display template information
STEP 102
G0805135
G0805138
Remove the supply hose (1) from port P (2) of the
Steer-Mode Valve. Install the inlet hose (3) from an
in-line flowmeter on the supply hose (1) and the
flowmeter outlet hose (4) on the Steer-Mode Valve
Port P (2).
STEP 103
G0805015
OPEN the load control valve (1) of the flowmeter.
Start the engine and run at 1000 RPM. Turn the
steering wheel in one direction until the wheels reach
their travel limits and hold. Slowly close the load
control valve.
If the pressure is less than 2000 psi (138 bar), repair
or replace the steering control unit.
If the pressure is 2000 psi (138 bar), proceed to the
next step.
STEP 104
G0805015
OPEN the flowmeter load control valve and move the
Steer-Mode Switch to the 2-Wheel-Steer position.
If the pressure is less than 2000 psi (138 bar), repair
or replace the front steering cylinder.
If the pressure is 2000 psi (138 bar), repair or replace
the rear steering cylinder.
2
1
4
3
View thousands of Crane Specifications on FreeCraneSpecs.com
View thousands of Crane Specifications on FreeCraneSpecs.com