PRINTED IN U.S.A.
601-30
913241/BP0508
Alt= to hide template information
Alt+ to display template information
Template Name: OML_2_col
0-00000
Template Date: 1994_04_22
RS5/6-34 Telescopic Handler
HYDRAULICS
FRAME LEVELING CYLINDER QUICK
TEST
WARNING
All trapped hydraulic pressure must be relieved
from the system before installing a gauge in any
pressure tap. A sudden release of hot oil could
cause burns or other serious injury.
STEP 59
G0805117
Install a 5000 psi (345 bar) pressure gauge and hose
on the SP test port of the flow divider.
NOTE:
The hose must be long enough to observe
the pressure gauge from inside the cab or
standing clear of the fork lift.
STEP 60
G0805117
Start the engine and run at 1000 RPM. Tilt the frame
to the right until the frame leveling cylinder reaches
the end of its stroke and hold. The pressure gauge
should read 2000 psi (138 bar).
If the pressure is less than 2000 psi (138 bar),
proceed to the next step.
If the pressure is 2000 psi (138 bar), but the frame
leveling does not work properly, go to the Frame
Leveling Counter Balance Valve Test.
If the pressure is more than 2000 psi (138 bar),
replace the flow divider.
STEP 61
G0805117
Turn the steering wheel until the wheels reach their
travel limits and hold. The pressure gauge should
read 2000 psi (138 bar).
If the pressure is less than 2000 psi (138 bar), go the
Pump Pressure Test.
If the pressure is 2000 psi (138 bar), proceed to the
next step.
View thousands of Crane Specifications on FreeCraneSpecs.com
View thousands of Crane Specifications on FreeCraneSpecs.com
