RS5-34 Telescopic Handler
LIFT CYLINDER
PRINTED IN U.S.A.
607-4
913241
Alt= to hide template information
Alt+ to display template information
Template Name: OML_2_col
907871E
Template Date: 1997_02_12
STEP 11
G0805227
Install and tighten the retainer bolt (1) and nut (2) in
the upper pivot pin.
Rem ove the lifting strap and hoist from the lift
cylinder.
STEP 12
G0805232
Using a pry bar, extend the cylinder enough to align
the pivot pin retainer bolt hole with the hole in the
cylinder mount and reinstall the lower pivot pin. Use
care not to damage the grease fitting.
STEP 13
G0805224
Install and tighten the retainer bolt (1) and nut (2) in
the lower pivot pin.
STEP 14
Remove the caps and plugs from the hydraulic
fittings and hoses.
STEP 15
G0805223
Reconnect the hydraulic hoses to the lift cylinder.
NOTE:
If removed, install the opposite side lift
cylinder in the same manner.
STEP 16
Use a grease gun with the specified grease to
lubricate the upper and lower pin grease fittings.
2
1
1
2
View thousands of Crane Specifications on FreeCraneSpecs.com
View thousands of Crane Specifications on FreeCraneSpecs.com
