![background image](http://html1.mh-extra.com/html/gehl/rs5-34/rs5-34_service-manual_2205870211.webp)
RS5-34 Telescopic Handler
CYLINDER REPAIR
PRINTED IN U.S.A.
605-7
913241
Alt= to hide template information
Alt+ to display template information
Template Name: OML_2_col
Rac 0-00000
Template Date: 1997_02_12
STEP 32
G1540MP
Install the inner seal in the center groove of the
piston. Be sure the seal is not rolled or twisted.
STEP 33
G1539MP
Install the outer seal over the inner seal in the center
groove of the piston.
STEP 34
G1538MP
Install the two wear rings on the piston Apply a thin
coat of oil o n th e seal and wea r r in gs pri or to
installation of the rod assembly.
STEP 35
Remove the rod from the vise.
Clamp the base end of the barrel in a vise or other
holding fixture.
STEP 36
G1535MP
Carefully install the rod assembly into the cylinder
barrel.
IMPORTANT:
Protect the chrome finish on the
cylinder rod at all times. Damage to surface of the rod
can cause premature seal failure.
STEP 37
G1534MP
Install and tighten the gland ring nut on the cylinder
barrel.
View thousands of Crane Specifications on FreeCraneSpecs.com
View thousands of Crane Specifications on FreeCraneSpecs.com