RS5/6-34 Telescopic Handler
HYDRAULICS
PRINTED IN U.S.A.
601-23
913241/BP0508
Alt= to hide template information
Alt+ to display template information
Template Name: OML_2_col
0-00000
Template Date: 1994_04_22
STEP 36
G0805097
Shut off the engine. Remove the pressure gauge
from the tilt up supply hose (1) and remove the cap
from the cylinder port (2). Install the hose on the
cylinder.
STEP 37
G0805095
Remove the supply hose (1) from the rod (tilt down)
port (2) of the tilt cylinder. Cap the cylinder port and
install a 5000 psi (345 bar) pressure gauge and hose
on the cylinder supply hose.
1
2
1
2
STEP 38
G0805077
G0805098
Start the engine and run at 1000 RPM. Hold the
joystick in the TILT DOWN position until the cylinder
reaches the end of its stroke. Hold the joystick in the
TILT DOWN position. The pressure gauge should
read 3000 PSI (207 Bar).
If the pressure gauge reads less than 3000 psi (207
bar), repeat Steps 33, 34 and 35 for the tilt down
relief valve.
View thousands of Crane Specifications on FreeCraneSpecs.com
View thousands of Crane Specifications on FreeCraneSpecs.com
