gefran TPD32-EV-...-2B, Instructions Manual

Page: 157 / 504

—————— Instruction manual ——————
157
Speed max neg
It defines the maximum speed for the counterclockwise rotation of the motor TPD32-
EV...4B... This parameter effects the input of the speed regulator and therefore takes into
account both the reference values that come from the ramp as well as the direction of
rotation (see Figure 6.4.1.1).The value of the parameter entered is based on the factor
function.
Speed limited Message that indicates that the reference value, is currently limited by the entered
minimum and maximum limit values.
High Reference value currently limited since the value entered is out
of range of the limit values defined.
Low Reference value within the defined limit values.
n
ote
!
The Speed min amount , Speed min pos and Speed min neg parameters have an effect on
the Ramp ref 1 reference value, the motor potentiometer function and the multi-speed func -
tion. They do not, however, have an effect on the
Ramp ref 2
parameter!
6.5.2 Armature current limits (Current limits)
LIMITS
Current limits
[715] T current lim type
[7] T current lim [%]
[8] T current lim + [%]
[9] T current lim - [%]
[10] In use Tcur lim+ [%]
[11] In use Tcur lim- [%]
[13] Current lim red [%]
[342] Torque reduct
The current effects the input of the current regulator and only take into account the armature current.
Parameter description No.
Value
Standard
Configuration
min max
Factory
American
Factory
Standard
T current lim type
T lim +/- (0)
T lim mot gen (1)
715 0 1 0 0 -
T current lim [%]
7 0 200 150 150 **
T current lim + [%]
8 0 200 150 150 **
T current lim - [%]
9 0 200 150 150 **
Curr limit state
Curr. limit not reached (0)
Curr. limit reached (1)
349 0 1 Digital output 5 ***
In use Tcur lim+ [%]
10 0 200 -
In use Tcur lim- [%]
11 0 200 -
Current lim red [%]
13 0 200 100 100 -
Torque reduct
Not active (0)
Active (1)
342 0 1 Not active (0) Not active (0) *
* This function can be assigned to one of the programmable digital inputs.
**
This parameter can be assigned to a programmable analog input.
*** This function can be assigned to one of the programmable digital outputs.