gefran TPD32-EV-...-2B, Instructions Manual

Page: 233 / 504

—————— Instruction manual ——————
233
Up
Down
Mpot output mon Mode:Last val
Start
In
Follow
mode with the
Stop
or
FastStop
command present, the
Down
command is simulated, i.e. the output
of the Motor potentiometer function moves to lower limit with the set ramp time.
If the
Run command is sent the motor potentiometer output decrease is stopped and the current value used in
addition to Ramp Ref 1 and Ramp Ref 2 to set the actual Ramp Ref .
Up
Down
Mpot output mon Mode:Follow
Start
Option 2:
The two operating modes are: Ramp or Fine.
In Ramp mode, each time the Up or Down commands are enabled, the output of the Motor potentiometer func -
tion increases or decreases with the set ramp. When the Up or Down command is removed, the last value that
was reached is maintained.
Up
Down
Mpot output mon Mode:Ramp
In Fine mode, each time the Up or Down commands are enabled, the output of the Motor potentiometer func -
tion increases or decreases by 1 rpm.
If the command persists for less than 1 second, no other changes are made on the output.
If the command persists for more than 1 second, the output increases or decreases with the set ramp. The varia
-
tion with the set ramp is performed gradually (1 second). When the Up or Down command is removed the last
value that was reached is maintained.