gefran TPD32-EV-...-2B, Instructions Manual, Page: 156 / 504

—————— TPD32-EV ——————
156
6.5 LIMITS
6.5.1 Speed Limits
LIMITS
Speed limits
Speed amount
[1] Speed min amount [FF]
[2] Speed max amount [FF]
Speed min/max
[5] Speed min pos [FF]
[3] Speed max pos [FF]
[6] Speed min neg [FF]
[4] Speed max neg [FF]
Parameter description No.
Value
Standard
Configuration
min max
Factory
American
Factory
Standard
Speed min amount [FF]
1 0 2
32-1
0 0 -
Speed max amount [FF]
2 0 2
32-1
5000 5000 -
Speed min pos [FF]
5 0 2
32-1
0 0 -
Speed max pos [FF]
3 0 2
32-1
5000 5000 -
Speed min neg [FF]
6 0 2
32-1
0 0 -
Speed max neg [FF]
4 0 2
32-1
5000 5000 -
Speed limited
Speed not limited (0)
Speed limited (1)
372 0 1 *
* This function can be assigned to a programmable digital output.
Speed min amount It defines the minimum speed for both directions TPD32-EV...4B. A value below mini -
mum is not accepted, regardless of the reference value selected. This parameter effects
the ramp input. If the
Speed min amount
parameter is changed, the Parameter
Speed
min pos
and
Speed min neg
parameters are set to the same value. If any of these pa -
rameters are subsequently changed, the last change is valid. The value to be entered is
based on the factor function.
Speed max amount
It defines the maximum speed for both directions TPD32-EV...4B... This parameter
affects the speed regulator input and therefore takes into account both the reference
values that come from the ramp as well as the direction of rotation (see Figure 6.4.2.1).
If the Speed max amount parameter is changed, the Speed max pos and Speed max
neg
parameters are set to the same value. If any of these values is subsequently changed,
the last change is valid. The value to be entered is based on the factor function.
Speed min pos It defines the minimum speed for the clockwise rotation of the motor. A value below
minimum is not accepted, regardless of the reference value selected. This function ef -
fects the ramp input (see Figure 6.4.1.1). The value of the parameter to be entered is
based on the factor function.
Speed max pos
It defines the maximum speed for the clockwise rotation of the motor. This function af -
fects the input of the speed regulator and therefore takes into account both the reference
values that come from the ramp as well as the direction of rotation (see Figure 6.4.1.1).
The value of the parameter entered is based on the factor function.
Speed min neg It defines the minimum speed for the counterclockwise rotation of the motor TPD32-
EV...4B... A value below minimum is not accepted, regardless of the reference value
selected. This parameter effects the ramp input (see Figure 6.4.1.1). The value of the
parameter entered is based on the factor function.